A boompole is a curious tool. It's a microphone stand that cannot stand. In essence, a boompole is crude and simplistic, yet the engineering and thought put into their design is great. Once you've decided to purchase a boompole, you may be a bit taken aback when you first explore the available options. What tends to surprise people is that the starting price for boompoles is nearly $100 for inexpensive models and over $1000 for the most expensive ones. It just seems like a lot of money to pay for a stick. Invariably, people want to know one thing: what makes a boompole that much different from a broom pole? For starters, boompoles are expensive because of the lightweight materials and parts used in their construction. This is a tool that you are likely going to be traveling with, and holding above your shoulders. You want it to be as light as possible. Another aspect to take into consideration is the noise created when a boompole is operated. Special features are built into boompoles that make silent operation possible. Finally, the boompoles that we sell at B&H are all collapsible. Try stuffing a five foot broom pole into your equipment bag. There are two types of materials used to create boompoles: 1) Aluminum 2) Carbon Fiber Carbon fiber boompoles weigh less than aluminum, but they're also more expensive. Aluminum boompoles are heavier and stronger than carbon fiber. Cabled Vs. Non-cabled Some boompoles are “cabled”, others are not. A cabled boompole has a coiled microphone cable that runs internally through the pole. The end of the cable sticks out of the top of the pole and allows you to plug-in your microphone. An XLR output jack is installed at the bottom of the pole. This enables you to attach a microphone cable to the pole. The cabled boompole can then be plugged into a videocamera, a recording device, a mixer, or a wireless transmitter. The nice thing about a cabled pole is that set-up time is faster. In “run and gun” production situations (reality television, news reporting, etc.) a cabled boompole may be a necessity. You should be aware that cabled boompoles have some added weight, and collapsing the pole should be done carefully to avoid bunching up the internal cable. One plus for using a non-cabled pole is that the audio signal doesn't have to pass through two separate audio cables to get to its destination. In this situation, the loss of audio quality is minor, but still, it doesn't hurt to avoid it. You also have your choice of what kind of microphone cable to use. You can opt for a single Canare or a Mogami cable for premium audio quality. Helpful Hint! A handy feature to look for when choosing a cabled boompole is a “side exit”. This means the XLR output jack is not on the very bottom of the pole, but rather it's mounted on the side of the bottom end of the pole. The advantage is that between takes you can rest the base of the pole on the ground without applying pressure and damaging the vulnerable audio cable and output jack attached to the pole. Using a right angle XLR cable for bottom exit boompoles is also highly recommended. Accessorize Yourself There are many helpful accessories available for boompoles icluding: Cases, Mounts, Quick Disconnects and Counter Weights. The mount that you need to attach a microphone to is sold separately. Worry not dear reader, you can learn all you need to know about mounts for boompoles in the previous pro audio update article about shockmounts. Avoid a Common Mistake One unforeseeable pitfall first-time boompole owners often experience is prematurely wearing out the locks on their pole. When they extend the pole to use it, they often over-tighten the locks that hold the segments of the pole in place. Those locks are pretty fragile and require thoughtful treatment when used. They don't need to be forcefully tightened. Just wipe any dust and tighten them enough to hold steady, and your boompole will last much longer. Give Your Arms a Break! You may not always have a pair of arms available to operate the boompole. With the appropriate parts you can safely mount your boompole on a stand for both action and static scenes.

_______________________________________________________

Article Information Source :http://www.bhphotovideo.com/